FTI
FTI DB11 — Magnetic-drive centrifugal pump — Model series
Model series
- Model
- DB11
FTIConfirm appearance by the complete product code
FTI · Model series
FTI HVDP-HR — Industrial pump and equipment reference — Model series
HVDP-HR uses a progressive-cavity arrangement for thicker, pumpable liquids. It provides the higher-output option within the two HVDP configurations listed here.
Send the complete model, item number, quantity and nameplate photograph. DFIN will confirm the configuration, supply scope and lead time.
PRODUCT RECORD
Recorded specifications and identification
| Brand | FTI |
|---|---|
| Record scope | Model series |
| Product type | Industrial pump and equipment reference |
| Model / configuration | HVDP-HR |
| Maximum flow — electric-drive envelope | 32 L/min |
| Maximum head — electric-drive envelope | 91 m |
| Maximum published viscosity | 20,000 cP |
| Published temperature range | −29 to 82 °C |
This is a series, model or configuration reference. Family maximum values are independent catalogue limits and must not be combined as a guaranteed operating point. It is not a stock or delivery promise.
SELECTION AND SERVICE
Configuration and operating conditions
316 stainless-steel tube; selected Buna, FKM or PTFE stator and compatible seals.
Supply viscosity at pumping temperature and confirm the stator material. Review inlet filling and the electric motor with the hose duty.
- Use the model, tube length, serial number and motor identification to specify the impeller or rotor, shaft, seals and other service components. HVDP assemblies also require the correct stator.
- Confirm whether the requested supply includes tube, motor, hose, nozzle and connections. These components are not assumed to be included with a bare pump tube.
- Use the complete nameplate designation, serial number and component item number to confirm the equipment revision and fit.
- Check the fluid, temperature, viscosity, required flow, pressure, suction conditions and connection standard for the actual application.
- Confirm all wetted materials, seals, diaphragms and other selected components against the operating conditions. A material name alone does not establish suitability.
- For replacement parts, include photographs of the old part, its assembly position and relevant dimensions.
Information for your quotation
Include the complete model or item number, quantity, equipment nameplate, required supply scope, delivery destination and timing. For a pump selection, add the operating conditions. For a repair, include the original part and assembly information.
Request this product