FTI
FTI DB11 — Magnetic-drive centrifugal pump — Model series
Model series
- Model
- DB11
FTIConfirm appearance by the complete product code
FTI · Model series
FTI SP10 — Self-priming magnetic-drive centrifugal pump — Model series
A sealless magnetic-drive centrifugal model for compatible chemical service. The self-priming arrangement is relevant when suction conditions require this function.
Send the complete model, item number, quantity and nameplate photograph. DFIN will confirm the configuration, supply scope and lead time.
PRODUCT RECORD
Recorded specifications and identification
| Brand | FTI |
|---|---|
| Record scope | Model series |
| Product type | Self-priming magnetic-drive centrifugal pump |
| Model / configuration | SP10 |
| Suction × discharge | 1 × 1 in |
| Published flow range at 2,900 rpm | 0.114–12.2 m³/h |
| Maximum head at 2,900 rpm | 13.7 m |
| Maximum working pressure | 5.5 bar |
| Published power range at 2,900 rpm | 0.10–0.63 kW |
This is a series, model or configuration reference. Family maximum values are independent catalogue limits and must not be combined as a guaranteed operating point. It is not a stock or delivery promise.
SELECTION AND SERVICE
Configuration and operating conditions
Select casing, impeller, bearing and O-ring materials from the model specification.
Provide duty flow and head, suction level and liquid properties. Check the curve at the intended speed and verify any minimum-flow or priming requirement.
Published 2,900 rpm hydraulic range. Power values are based on specific gravity 1.0; impeller diameter and liquid properties determine the selected operating point.
- Service items include the impeller assembly, thrust ring, bushing, shaft, O-rings, barrier and drive magnet, according to the model drawing.
- Drawing callout positions are not orderable part codes. Send the serial number and actual material arrangement to identify replacement parts.
- Use the complete nameplate designation, serial number and component item number to confirm the equipment revision and fit.
- Check the fluid, temperature, viscosity, required flow, pressure, suction conditions and connection standard for the actual application.
- Confirm all wetted materials, seals, diaphragms and other selected components against the operating conditions. A material name alone does not establish suitability.
- For replacement parts, include photographs of the old part, its assembly position and relevant dimensions.
Information for your quotation
Include the complete model or item number, quantity, equipment nameplate, required supply scope, delivery destination and timing. For a pump selection, add the operating conditions. For a repair, include the original part and assembly information.
Request this product